LRC for a maximum piercing force of 30 or 50kN
The LuBo Roller Cam is developed to meet the market's demand for a standard cam unit. The LuBo Roller Cam unit is the ideal solution for a small compact and cost effective piercing unit.
The Roller Cam is available for a max. Piercing force of 30kN, storke 50 and 80mm and for a max. Piercing force of 50kN, stroke 50, 80 and 100mm. All models are equipped with an oilless slide bearing and, for the return action a gas spring is employed, with an initial force of 2000N.
The contact force between the driver and the cam unit is taken care of by a heavy duty roller bearing. The driver itself is to be manufactured by the user to give the required movement scheme and the contact surface on the driver should be hardened is order to maximize the lifetime of Roller Cam.
The angle between the driver and the direction of motion for the Roller Cam is to be 50°.
The Roller Cam can be fixed to the tool with a key/or two cylindrical pins.
When in the right position, the Roller Cam must be bolted to the tool with 4-M8 cap screws.
The screws can be accessed from the side and from the top.